* Actual product appearance may vary.
overview
The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL 2.5" coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep Wrangler JL coil springs provide 2.5" of lift height (based on a factory equipped 4-door Rubicon JL) and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler.
features & Benefits
- 2.5" lift height
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 2" rear increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- Includes swaybar links and bump stop spacers
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
download installation guide
Tech Info:
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.5” Backspace / -6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.5” Backspace / -12mm Offset
- Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 4.5” Backspace / -12mm Offset
- Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: 22029)
- TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JL build which usually includes added weight of accessories such as heavier rear bumper/spare tire. Lift heights may be higher than advertised if installed on a stock weighted vehicle.
- TECH NOTE: The supplied coil shim is used to account for the difference in heights from side to side and correct a passenger side lean.
- TECH NOTE: Wrangler JL 4-door will have front lift height of 2.5" over stock
- TECH NOTE: Wrangler JL 2-door will have front lift height of 3" over stock
- TECH NOTE: Not compatible with Wrangler JL 4xe or Unlimited Rubicon 392 trims. See ICON Help Center for more information.