951.689.icon

New Products

Photo of ICON Jeep JK Front Hydraulic Air Bumpstop System

Part Details

PART No. 22019

PRICE: $698.19

AVAILABILITY: 08/08/2013

DETAILS

ICON Jeep JK Front Hydraulic Air Bumpstop System

ICON Jeep JK Hydraulic Air Bumpstop System

The 2007+ Jeep JK is a vehicle that possesses some great off-road capabilities in stock trim, but can benefit considerably with the addition of aftermarket suspension components. Realizing this, ICON engineers took a look at the JK as a whole, and developed an array of parts to take the performance of your Jeep to the next level. The ICON Vehicle Dynamics Front Hydraulic Bumpstop System was designed to provide a much smoother and more controlled ride when the vehicle is subjected to maximum suspension travel. This kit replaces the OEM foam bumpstops. Foam bumpstops have limited energy absorption capacity and can release rather uncontrollable upon rebound. The characteristics of the factory bumpstops often translate into a harsh ride and ill-handling vehicle in rough terrain. On the other hand the ICON system has been tuned specifically for the Jeep JK to offer smooth engagement, maximum bottom-out resistance, and controlled return. With a simple bolt-on installation, proven performance, and no loss in travel there is no reason NOT to bolt up the ICON Vehicle Dynamics Hydraulic Bumpstop Kit to your Jeep and experience the difference.

ICON Jeep JK Front Bumpstop Kit Features:

• Bolt-on design for clean install with no welding

• Jeep JK specific tune to maximize bottom out resistance while
having low initial contact force for smooth engagement,
as well as return

• Absorbs additional impact energy over the OEM bumpstop and
returns the axle in a more controlled manner

• Works on non lifted or lifted applications

• Compatible with ICON JK coilover conversion system

Photo of Toyota FJ Cruiser / 4Runner Rear Hydraulic Air Bump Stop System

Part Details

PART No. 56104

PRICE: $698.19

AVAILABILITY: 06/26/2013

DETAILS

Toyota FJ Cruiser / 4Runner Rear Hydraulic Air Bump Stop System

Toyota Fj Cruiser / 4Runner Bump stop kit

ICON Vehicle Dynamics now offers a bolt-in Hydraulic Bump Stop Kit for the 2007 to current Toyota FJ Cruiser. This kit reduces rear-end “kick” and helps to improve the overall offroad performance of the vehicle. The OEM rubber bumpstops have a limited energy absorption capacity that is released rather uncontrollably upon rebound, resulting in a harsh ride and ill-handling vehicle in rough terrain.

Key Features:

Hydraulic / pneumatic bump stop increases bump energy capacity

Velocity sensitive bump stop increases the amount of energy absorbed the faster it is hit

Reduces rear end kick and improves overall performance

Increased bottom resistance over stock

No loss in travel

Easy installation inside coil

Pre-tuned for most users

 

Photo of 2010 - Current Ford Raptor Quick Release Midflap System

Part Details

PART No. 95110

PRICE: $299.25

AVAILABILITY: 03/12/2013

DETAILS

2010 - Current Ford Raptor Quick Release Midflap System

The team at ICON Vehicle Dynamics has engineered another first for Ford Raptors, a rear shock and undercarriage protection system to keep your Raptor performing at its peak whether you have stock shocks or not. The ICON Raptor Midflap with quick release has a unique design, allowing you the ability to take the flap portion on or off in seconds. The ICON Raptor Midflap mounting bracket bolts to the mid-cab body mount permanently and out of sight. The protective midflap itself has a unique hook and latch system for install or removal in seconds. This unique design allows you to keep the midflaps on at all times or just slap them on when hitting the trails. The ICON Ford Raptor Midflap was tested over 3 months and thousands of miles from the snow and ice covered trails in Michigan at below zero temps, to the heat, silt, rocks, and sand terrains of the Mojave desert and Baja. After rigorous testing, both the shocks and their protective covers remained in near new condition.

 

Key Features:

• Bolt-on design with unique hook and latch system for quick removal of midflap

• No tools required once midflap base is intalled

• Protects undercarriage and rear shocks from abrasive sandblasting while driving offroad at speed

• Keeps mud from collecting in the large cavity between the inner bed and outer bed sheet metal on

flared body Raptors

• Midflap flexes above the frame / running board and wont get ripped off even in large rocky terrains

 

Photo of Toyota Tacoma / FJ Cruiser / 4Runner S2 Modular Performance Shock System

Part Details

PART No. 56102

PRICE: $598.50

AVAILABILITY: 02/21/2013

DETAILS

Toyota Tacoma / FJ Cruiser / 4Runner S2 Modular Performance Shock System

2005 - Current Toyota Tacoma S2 Modular Performance Shock System

The ICON Vehicle Dynamics S2 Modular Performance shock system redefines the offroad capability of the 2005 – Current Toyota Tacoma / 2007 – Current Toyota FJ Cruiser / 2003 – Current Toyota 4Runner by enhancing the front suspension with the addition of a secondary shock to an existing ICON coilover setup. A common misconception is that overly-complicated and expensive long-travel kits are to achieve the ultimate in offroad performance. This has been put to rest with the development of the ICON S2 system. The S2 Modular Performance shock system system utilizes the factory lower control arm and maintains OE track width while providing excellent suspension damping capabilities and an exceptional build quality you would expect from any ICON Vehicle Dynamics product. All of these features come at a fraction of the cost of a long-travel setup.

This bolt-on system was developed to significantly enhance the drivability of the Tacoma / FJ Cruiser / 4Runner in extreme offroad conditions while at the same time eliminating the need for any major alteration of the frame or any other factory suspension components. The combination of a billet aluminum shock tower adapter, fabricated secondary shock hoop, and a steel skidplate with incorporated shock mount make for a straightforward and durable installed product.

The modular aspect of this system allows for modifications to the vehicle to be achieved in stages, so the user can build their vehicle as desired rather than all at once. Multiple secondary shock options also provide even more tuneabity of the system as a whole, as ICON 2.5” Remote Reservoir Shocks, 2.5” Remote Reservoir CDC Valve Shocks, or 2.5” Two-Tube Bypasses may be used to attain any level of performance desired.

 

Key Features:

• Does not require welding to the frame

• Retains robust factory bumpstops

• Does not require aftermarket lower control arms

• Can be purchased in stages

• Simple installation

• Lifetime Warranty on fabricated and machined parts

Vehicle Fitment:

• 2005 – Current Toyota Tacoma

• 2007 – Current Toyota FJ Cruiser

• 2003 – Current Toyota 4Runner

Photo of 2005 - Current Toyota Tacoma Lower Control Arm Skid Plate System

Part Details

PART No. 56101

PRICE: $173.25

AVAILABILITY: 02/12/2013

DETAILS

2005 - Current Toyota Tacoma Lower Control Arm Skid Plate System

Overview:

ICON Vehicle Dynamics’ bolt-on skid plate system for 2005 – Current
Toyota Tacoma offers the ultimate in lower control arm protection for
both on and offroad use. Reduce the risk of lower arm failure during
everyday driving, running offroad trails, getting to your favorite
hunting or fishing spot, or crawling in mountainous terrain. This skid
plate system will allow you to slide over rocks and debris all while
helping to protect your lower arms from trip-ending damage. Made from
3/16″ laser cut steel, our Tacoma lower arm skid plates offer extreme
durability and a precision fit for easy installation.

The 05+ Toyota Tacoma ICON bolt on skid plate system also serves as a locator for the lower shock mount for our S2 Modular Performance Shock System.
This modular approach allows you to install these skid plates without
waste if you decide to upgrade and add the full S2 system down the road.
You are able to purchase knowing it is 1 of the 3 components you will
need to run the S2 Secondary Shock System, giving you the opportunity to
build in stages if you choose.

Key Features:

• Bolt-on design

• Made from 3/16″ laser cut steel

• Durable black powdercoat finish

• Serves as the lower shock mount for our S2 Modular Secondary Shock System

• Adds protection from rocks and trail debris during on or offroad use