* Actual product appearance may vary.
overview
This 3" system is designed to lift your Ford Excursion 3" in front to provide room for 33” tires. This system drops your stock springs 3", which allows for lift while maintaining the stock spring rate. This system comes with a 1" bump stop spacer (not pictured) to prevent spring fatigue during the suspension cycle. This system is the ideal for all Excursions.
features & Benefits
- Increased wheel travel
- Durable powder coat finish
- Less body-roll than stock truck
- Isolates Stock springs for Factory Like Ride Quality
- No change in towing capacity
- No drive shaft modifications needed
- 100% Bolt-on system - no drilling,cutting or welding necessary for install
download installation guide
Tech Info:
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00” Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset
- Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
- APPLICATION NOTE #3: No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional.
- APPLICATION NOTE #5: 2001-2004 3” And 4.5” Hanger Kits Come Complete With A New Replacement Front Cross-Member. This Crossmember Replaces The Factory Crossmember
- APPLICATION NOTE #17: These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits
System Components:
- 33099 (QTY: 1) | 99-04 FSD 3" HANGER KIT
- 33050 (QTY: 1) | 99-04 FSD 3" BASH BAR KIT
- 33100 (QTY: 1) | 99-04 FSD 1.375" BUMP STOP SPACER KIT
- 194275 (QTY: 1) | 99-UP FSD 4" BLOCK KIT
- 37003 (QTY: 1) | 99-10 FSD REAR 15" U-BOLT KIT
- 196001 (QTY: 2) | EXCURSION REAR BAR PIN
Request a Quote
Don't Forget
the wheels
