NEW PRODUCT | NEW EXP BRONCO SUSPENSION SYSTEMS
BRIDGING THE GAP IN BRONCO SUSPENSION
ICON Vehicle Dynamics is excited to announce it release of their new EXP shock series for the 21-UP Bronco!
EXP Series shock absorbers by ICON Vehicle Dynamics combine the performance of a fully rebuildable 2.5-inch diameter premium shock with the convenience and cost-benefits of re-using the Bronco’s factory coil spring and other components. EXP bridges the gap between spacer lifts and threaded coilovers, providing suspension lift, custom-tuned performance and maximum travel all in an economical package.
EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance. Its one-piece digressive piston design is valved specifically for the Bronco to provide unsurpassed performance and ride quality on and off-road.
The 6061 billet aluminum coil spring seat is CNC machined to fit the molded heavy duty urethane coil spring seat that is specifically design for fit each of the Bronco model’s OE coil spring. A series of snap-ring grooves machined into the shock body provide easily-selectable ride height adjustment from 0 to 3” over stock, depending on the Bronco’s OE suspension system (HOSS 1.0 or 2.0). EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Bronco’s OE upper shock and spring mounts.
EXP shocks are custom tuned by ICON engineers to maximize damping performance when used in conjunction with the Bronco’s stock coil springs. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.
48601: Fitment for HOSS 1.0 Bronco Suspension Package (Front)
KEY FEATURES AND BENEFITS
- Vehicle specific design for 2021-UP Ford Bronco with HOSS 1.0 Suspension Package
- Vehicle specific tuned for superior shock damping and control
- 2.5 Aluminum Series Shock with Internal Reservoir
- Adjustable ride height from 1.5-3” of front lift over stock with the use of snap ring
- Utilizes factory coil and coil hardware
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- One-piece, impact extruded, hard anodized aluminum cylinder offers excellent corrosion resistance and consistent finish
- CNC machined 6061 aluminum components with a black anodized finish
- PTFE lined spherical bearing for extended longevity and minimal deflection
- 100% Bolt-on, no cutting or welding necessary for installation
- Fully rebuildable and re-tunable
48611: Fitment for HOSS 1.0 Bronco Suspension Package (Rear)
KEY FEATURES AND BENEFITS
- Vehicle specific design for 2021-UP Ford Bronco with HOSS 1.0 Suspension Package
- Vehicle specific tuned for superior shock damping and control
- 2.5 Aluminum Series Shock with Internal Reservoirs
- Adjustable ride height from 1.5-3” of rear lift over stock with the use of snap ring
- Utilizes factory coil and coil hardware
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- One-piece, impact extruded, hard anodized aluminum cylinder offers excellent corrosion resistance and consistent finish
- CNC machined 6061 aluminum components with a black anodized finish
- PTFE lined spherical bearing for extended longevity and minimal deflection
- 100% Bolt-on, no cutting or welding necessary for installation
- Fully rebuildable and re-tunable
48602: Fitment for HOSS 2.0 Suspension Package (Front)
KEY FEATURES AND BENEFITS
- Vehicle specific design for 2021-UP Ford Bronco with HOSS. 2.0 Suspension Package
- Vehicle specific tuned for superior shock damping and control
- 2.5 Aluminum Series Shock with Internal Reservoirs
- Adjustable ride height from 0-3” of front lift over stock with the use of snap ring
- Utilizes factory coil and coil hardware
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- One-piece, impact extruded, hard anodized aluminum cylinder offers excellent corrosion resistance and consistent finish
- CNC machined 6061 aluminum components with a black anodized finish
- PTFE lined spherical bearing for extended longevity and minimal deflection
- 100% Bolt-on, no cutting or welding necessary for installation
- Fully rebuildable and re-tunable
48612: Fitment for HOSS 2.0 Suspension Package (Rear)
KEY FEATURES AND BENEFITS
- Vehicle specific design for 2021-UP Ford Bronco with HOSS. 2.0 Suspension Package
- Vehicle specific tuned for superior shock damping and control
- 2.5 Aluminum Series Shock with Internal Reservoirs
- Adjustable ride height from 0-3” of rear lift over stock with the use of snap ring
- Utilizes factory coil and coil hardware
- Inverted shaft up design featuring 7/8” diameter, induction hardened, chrome plated shaft
- One-piece, impact extruded, hard anodized aluminum cylinder offers excellent corrosion resistance and consistent finish
- CNC machined 6061 aluminum components with a black anodized finish
- PTFE lined spherical bearing for extended longevity and minimal deflection
- 100% Bolt-on, no cutting or welding necessary for installation
- Fully rebuildable and re-tunable
Holistic Engineering – The ICON Difference
When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This “holistic engineering” philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade.
Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing the are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up. ICON Vehicle Dynamics products are proudly designed, manufactured and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance and service it’s clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for the new Ford Bronco.