overview
This 4.5" system is designed to lift your Ford Excursion 4.5" in front to provide room for 35” tires. This system drops your stock springs 4.5", which allows for 4.5" of lift while maintaining the stock spring rate. This system comes with a 1.75" bump stop spacer to prevent spring fatigue during the suspension cycle. Also included in this kit is 5” rear block kit, with 17” U-bolts for a leveled stance. This system is the ideal for all Excursion’s.
features & Benefits
- Increased wheel travel
- Durable powder coat finish
- Less body-roll than stock truck
- Isolates Stock springs for Factory Like Ride Quality
- No change in towing capacity
- No drive shaft modifications needed
- 100% Bolt-on system - no drilling, cutting or welding necessary for install
download installation guide
Tech Info:
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00” Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset
- Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
- APPLICATION NOTE #3: No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional.
- APPLICATION NOTE #5: 2001-2004 3” And 4.5” Hanger Kits Come Complete With A New Replacement Front Cross-Member. This Crossmember Replaces The Factory Crossmember
- APPLICATION NOTE #17: These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits
System Components:
- 31020 (QTY: 1) | 00-04 FSD FRONT 4-8" BOX KIT
- 34099 (QTY: 1) | 99-04 FSD 4.5" HANGER KIT
- 34050 (QTY: 1) | 99-04 FSD 4.5" BASH BAR KIT
- 33100 (QTY: 1) | 99-04 FSD 1.375" BUMP STOP SPACER KIT
- 195275 (QTY: 1) | 99-24 FSD 5" BLOCK KIT
- 37002 (QTY: 1) | 99-10 FSD REAR 17" U-BOLT KIT
- 196001 (QTY: 2) | EXCURSION REAR BAR PIN