news & events

• 61720E - 17-UP FSD 4WD 2.5-3" 2.5 VS RR CDEV COILOVER CONV KIT
• 61721E  - 17-UP FSD 4WD 4-5.5" 2.5 VS RR CDEV COILOVER CONV KIT
• 67800EP - 17-UP FSD 4WD 0-2.5" FRONT 2.5 VS RR CDEV PAIR
• 67810EP - 17-UP FSD 4WD 4.5" FRONT 2.5 VS RR CDEV PAIR
• 67820EP - 17-UP FSD 4WD 7" FRONT 2.5 VS RR CDEV PAIR
• 37705EP - 17-UP FSD 0-3" REAR 2.5 VS PB CDEV PAIR
• 37701EP - 17-UP FSD 3-6" REAR 2.5 VS PB CDEV PAIR

Keep reading for detailed information on each of these exciting new CDEV-equipped products!

17-UP FSD 4WD FRONT 2.5 VS BOLT-IN COILOVER CONVERSION KITS WITH REMOTE RESERVOIR

61720E - 17-UP FSD 4WD 2.5-3" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT
61721E  - 17-UP FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT

Easily convert your Ford Super Duty to high-performance front coilovers with this easy bolt-in conversion kit. Available for lift heights of 2.5-3" or 4-5.5", these ICON coilovers feature our proven 2.5 VS Series shock technology, custom coil springs engineered specifically for the Ford Super Duty, and of course Remote Reservoirs with CDEV technology built in. An added benefit of this coilover conversion kit is that it allows (but does not require) the use of a secondary shock absorber in the original shock location without any further brackets or apparatus. (CDEV requires IIC Module & Install Kit - please note that the IIC system is currently capable of controlling just one shock per corner).

• Bolt-in system fits in OE coil bucket location
• 61720E ride height adjustable 2.5-3" or 3.25-3.75” depending on year of vehicle
• 61721E ride height adjustable 4-5.5" or 4.75-6.25” depending on year of vehicle
• ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
• Decreased body roll and improved on and off-road ride dynamics
• Vehicle-specific shock valving provides unparalleled ride quality and control
• Coilover conversion allows for addition of optional secondary shocks
• Corrosion resistant CAD plated coilover shock body with 7/8" shaft
• ICON engineered coil springs guaranteed for life against sagging or breakage
• FK Rod End bearings for extended longevity and minimal deflection
• Fully rebuildable and re-tunable

17-UP FSD 4WD FRONT 2.5 VS REMOTE RES CDEV SHOCKS

• 67800EP - 17-UP FSD 4WD 0-2.5" FRONT 2.5 VS RR CDEV PAIR
• 67810EP - 17-UP FSD 4WD 4.5" FRONT 2.5 VS RR CDEV PAIR
• 67820EP - 17-UP FSD 4WD 7" FRONT 2.5 VS RR CDEV PAIR

Improve your lifted (or stock height) Ford Super Duty's on- and off-road performance with ICON's proven 2.5 VS Series shock absorbers, available for FRONT lift heights of 0-2.5", 4.5" or 7". These performance shocks feature Remote Reservoirs with CDEV technology built in (requires IIC Module & Install Kit).

• ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
• ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
• One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
• Remote Reservoir increases oil volume and surface area to improve heat dissipation and reduce shock fade during prolonged use
• Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
• One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
• 7/8” diameter induction hardened, chrome plated shock shaft
• PTFE lined spherical bearings and application specific mounting hardware
• 6061 aircraft grade aluminum CNC machined components
• Fully rebuildable and re-tunable

17-UP FSD REAR 2.5 VS PIGGYBACK CDEV SHOCKS

• 37705EP - 17-UP FSD 0-3" REAR 2.5 VS PB CDEV PAIR
• 37701EP - 17-UP FSD 3-6" REAR 2.5 VS PB CDEV PAIR

Improve your lifted (or stock height) Ford Super Duty's on- and off-road performance with ICON's proven 2.5 VS Series shock absorbers, available for REAR lift heights of 0-3" or 3-6". These performance shocks feature Piggyback Reservoirs with CDEV technology built in (requires IIC Module & Install Kit).

• ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
• ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
•  One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
• Piggyback reservoir design increases oil volume and surface area to improve heat dissipation and reduce shock fade during prolonged use
• Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
• One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
• 7/8” diameter induction hardened, chrome plated shock shaft
• PTFE lined spherical bearings and application specific mounting hardware
• 6061 aircraft grade aluminum CNC machined components
• Fully rebuildable and re-tunable

15-UP F-150 & 17-UP FSD IIC MODULE & INSTALL KIT

93500 - 15-UP F-150 & 17-UP FSD IIC INSTALL KIT

ICON Intelligent Control is the brain that makes CDEV work. The IIC module contains a processor that takes G-force input from the onboard sensors, performs optimized compression damping calculations based on user input and/or preconfigured drive modes, and sends micro-adjustment commands to the CDEV's at each shock. And it does all of this near-instantaneously, reacting to the terrain and making adjustments on the fly, and all controllable through the ICON mobile app and a wireless connection. This kit includes the IIC module, mounting bracket, wiring harness and hardware, and is required with any CDEV installation.

• Offers selectable active shock damping adjustment as well as manual adjustment of baseline settings without exiting vehicle
• Onboard sensors monitor G-forces and movement of vehicle chassis
• Performs calculations based on sensor inputs, custom algorithms, and user defined settings at a rate of over 1000 times per second
• Sends necessary damping adjustments to CDEV shocks that react in under 40 milliseconds
• User interface provided by IIC Mobile App via Bluetooth connection to iOS device
• Mobile app offers preconfigured “Drive Modes” as well as the ability to create custom presets
• Also functions as a data logger for time, speed, distance, and G-force allowing you to record data from your trips
• Application specific mounting brackets, hardware and wire harnesses

TECH NOTES

61720E - 17-UP FSD 4WD 2.5-3" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT

• OE Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 5.00” Backspace / 6mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.25” Backspace / 6mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 20x9" w/ 5.25” Backspace / 6mm Offset
• Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
• TECH NOTE: Only compatible with 4WD models
• TECH NOTE: Springs are rated for diesel engines only
• TECH NOTE: Removal of the coil centering cup in factory coil bucket required for installation
• TECH NOTE: Also requires installation of IIC part number 93500 and CDEV rear shock part number 37705EP
• TECH NOTE: Connectivity for optional CDEV secondary front shocks in OE location in addition to CDEV coilovers coming soon!
• TECH NOTE: 2020-UP Super Duty models have a lower ride height from the factory than 2017-2019 models. This results in an increase of approximately .75" of additional lift height over ICON's advertised numbers
• TECH NOTE: 2020-UP Super Duty sub-models equipped with Tremor package will have lift height range of 1.25-1.75” over stock

61721E - 17-UP FSD 4WD 4-5.5" 2.5 VS RR CDEV BOLT IN CO CONVERSION KIT

• OE Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: ICON Alloys | 17x8.5" w/ 5.00” Backspace / 6mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 18x9" w/ 5.25” Backspace / 6mm Offset
• Recommended Aftermarket Wheels: ICON Alloys | 20x9" w/ 5.25” Backspace / 6mm Offset
• Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
• TECH NOTE: Only compatible with 4WD models
• TECH NOTE: Springs are rated for diesel engines only
• TECH NOTE: Removal of the coil centering cup in factory coil bucket required for installation
• TECH NOTE: Also requires installation of IIC part number 93500 and CDEV rear shock part number 37701EP
• TECH NOTE: Connectivity for optional CDEV secondary front shocks in OE location in addition to CDEV coilovers coming soon!
• TECH NOTE: 2020-UP Super Duty models have a lower ride height from the factory than 2017-2019 models. This results in an increase of approximately .75" of additional lift height over ICON's advertised numbers.
• TECH NOTE: 2020-UP Super Duty sub-models equipped with Tremor package will have lift height range of 2.75-4.25” over stock

67800EP - 17-UP FSD 4WD 0-2.5" FRONT 2.5 VS RR CDEV PAIR

• TECH NOTE: Compatible with 0-2.5” of front lift over stock
• TECH NOTE: Also requires installation of IIC part number 93500 and CDEV rear shock part number 37705EP
• TECH NOTE: Connectivity to install as secondary front shocks in OE location in addition to CDEV coilovers coming soon!

67810EP - 17-UP FSD 4WD 4.5" FRONT 2.5 VS RR CDEV PAIR

• TECH NOTE: Compatible with 4.5” of front lift over stock
• TECH NOTE: Also requires installation of IIC part number 93500 and CDEV rear shock part number 37701EP
• TECH NOTE: Connectivity to install as secondary front shocks in OE location in addition to CDEV coilovers coming soon!

67820EP - 17-UP FSD 4WD 7" FRONT 2.5 VS RR CDEV PAIR

• TECH NOTE: Compatible with 7” of front lift over stock
• TECH NOTE: Also requires installation of IIC part number 93500 and CDEV rear shock part number 37701EP

37705EP - 17-UP FSD 0-3" REAR 2.5 VS PB CDEV PAIR

• TECH NOTE: Compatible with 0-3” of rear lift over stock
• TECH NOTE: Also requires installation of IIC part number 93500 and CDEV front shock part number 67800EP or CDEV front coilover kit part number 61720E

37701EP - 17-UP FSD 3-6" REAR 2.5 VS PB CDEV PAIR

• TECH NOTE: Compatible with 3-6” of rear lift over stock
• TECH NOTE: Also requires installation of IIC part number 93500 and CDEV front shock part number 67810EP, 67820EP or CDEV front coilover kit part number 61721E

93500 - 15-UP F-150 & 17-UP FSD IIC INSTALL KIT

• TECH NOTE: Also requires installation of CDEV front and rear shock absorbers
• TECH NOTE: IIC currently operates 4 CDEV equipped shocks, 2 fronts (coilover or OE location) and 2 rears. Connectivity for optional CDEV secondary front shocks in OE location in addition to CDEV coilovers coming soon!